2024 John Deere Heavy-Duty Rotary Broom 60-inch

2024 John Deere Heavy-Duty Rotary Broom 60-inch

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model Heavy-Duty Rotary Broom
2024 John Deere Heavy-Duty Rotary Broom 60-inch

2024 John Deere Heavy-Duty Rotary Broom 60-inch

2024 John Deere Heavy-Duty Rotary Broom 60-inch

  • Clean everything from dirt and leaves or even 5 cm (2-inches) of snow with this versatile broom
  • Angle broom from 0-27 degrees, right or left
  • Choose from 9-different sweeping height positions, in increments of 5 inches

Features may include:

60-in. (152-cm) Heavy-Duty Rotary Broom

The 52-in. (132-cm) Rotary Broom increases tractor versatility by allowing it to be used for a variety of sweeping jobs. The broom effectively meets the needs of commercial, farm, home, and estate operators with four-season versatility:

Spring

The broom can be used to dethatch lawns, and it cleans off tennis courts quickly and effectively.

Summer

The broom effectively performs a wide variety of sweeping jobs, including cleaning sidewalks, parking lots, driveways, construction job sites, and barns. It can also be used for backfilling trenches.

Fall

The broom can be used to sweep leaves and windrow pine needles. It sweeps artificial turf and cleans up spectator areas after sporting events.

Winter

It effectively moves up to 2 in. (5 cm) of snow, which may eliminate the need for a snow thrower, depending on the operator's geographic area.

The 52-in. (132-cm ) Rotary Broom is compatible with X700 Series and 1023E, 1025R, 1026R, model year 2016 and older 2025R and 2032R, 2305-2720, 2210, 4010, 4110, 4115, and 4100 Tractors.

Polypropylene and steel wafers

The broom section is assembled with 32 polypropylene wafers.

Broom-head float

Casters provide a quick response, allowing the head to float and follow the terrain. The broom head also articulates for undulating terrain.

An adjustable, threaded rod allows the broom to float and follow the terrain.

Brush wear and pattern adjustment

An Acme screw and knob is used for infinite control of pattern. It also allows control of the depth of the bristles beyond raising the hitch as bristles wear down or more ground contact is needed.

Shields

The front drive shield provides additional protection against material becoming jammed in the sprocket and chain. The gearbox hood shield hinge and spring provide protection, yet allow convenient access to power take-off (PTO) shafts.

A hood debris deflector is available as an attachment:

  • Helps direct debris and dust ahead of broom
  • Can be adjusted up or down to help control material being swept

Drivetrain

Drive System Front power take-off (PTO) | input: Telescoping drive shaft
Gearbox Three-to-one, spiral bevel gear, synthetic extreme-pressure lubricant, shear pin protected, central location
Final Drive Three-to-one, spiral bevel gear, synthetic extreme-pressure lubricant, shear pin protected, central location

Dimensions

Dimensions Brush Diameter: 66 cm (26 in) | Hydraulic angling positions Right and left: Front quick-hitch: Any position up to 27 degrees left or right / Front 3-point htich: Any position up to 27 degrees left or right
Width Sweeping path Front quick-hitch: at 27 degress: 136 cm (53.5 in.) / Front 3-point hitch: at 30 degrees: 127 cm (50 in) | brush: 152 cm (60 in)

Features

Features Number of wafers: 32 | Angling method On X700: Hydraulic / On compact utility tractors: Hydraulic (dual selective control valve [SCV] joystick controls angling) | hood type: Steel three-piece bolt-together

Product Photography