2024 John Deere Air Drills 730

Information

2024 John Deere Air Drills 730

No-Till Air Drill

See the flow of seed & fertilizer from the cab with RelativeFlow™ blockage monitoring

Double-disk openers offer precise depth

Three tool widths and two seed row spacings

Field Doc™ and Map-Based Prescriptions

Features may include:

Integration advantages of Deere tractor, cart, tool and technology
  • To win big in small grains, it takes a seeding solution that superseeds your expectations. John Deere delivers with a complete line of everything you need – and the sizes you want – to seed for success. Air-hoe drills. Commodity air carts. No-till air drills. Openers. Fertilizer attachments. Central commodity systems. Box drills. Plus precision ag technology to stretch your productivity to higher levels. But it’s far more than iron and technology. It’s the exceptional agronomic know-how and unsurpassed dealer support in all phases of production to keep you running. With our latest additions to equipment and openers, our seeding solutions deliver the next-generation performance you need to help you reach the full potential of each seed. That’s our commitment to you.
Double-disk openers offer precise depth
  • Leading edge cuts through moderate residue levels
  • Narrow disk angle leaves smooth field finish
  • The 34.3-cm (13.5-in.) diameter double-disk openers are offset to create a narrow furrow for optimal seed placement. They feature aluminum boots and have a long-arm/short-arm stagger for residue clearance. Either 15.2-cm (6-in.) or 19-cm (7.5-in.) row spacing is available.
Depth-gauging press wheels give accurate seed placement
  • Allow quick, easy opener depth control
  • Assist in controlling furrow depth
  • Promote positive seed-to-soil contact for good germination

Photos

Highlights

  • Swift Current, Saskatchewan
  • 2024
  • John Deere
  • Air Drills 730
  • Available
  • Mainframe - Centerframe: 3.56 m (11-ft. 8-in.) | 4.97 m (16-ft. 3.6-in)
  • Maximum: 3.90 m (12-ft. 9.3-in) | Minimum: 3.46 m (11-ft. 4.3-in)

Specifications

  • 2024
  • John Deere
  • Air Drills
  • 730
  • Seed Drill
  • Wing: (4) 9.5Lx15 Load Range D walk-over tandems | Gauge wheels, wing: 2-7.60x15 8PR | Centerframe: (4) 11Lx15 Load Range D walk-over tandems | Castering stabilizer: (2) 7.60x15 8 PR
  • Trip force: 890 N (200 lb)
  • Press wheel down pressure: 65 lb. at 1500 psi / Opener down pressure: 105 lb./opener
  • active hydraulic downpressure | Minimum SCVs: 2 SCVs
  • 3-section drawn flexible
  • Underframe clearance: 60.9 cm (24 in.) | Mainframe - Wing flexibility: 11 degrees up, 9 degrees down | opener: 13.5-in. (343 mm) with 0.25-in. (6 mm) offset / spacing: 6-in. (15.2 cm) or 7.5-in. (19.1 cm) | mainframe size: 8.7 m (28 ft) | Cross tubes: 102x102 mm (4x4-in) | End tubes: 50x127 mm (2x5-in) | Hitch (tubular steel): 76x152 mm (6x10-in) | Rockshaft: 140 x 7.92 mm (5.5 x 0.312-in.) | Wing flexibility: 11 degrees up, 9 degrees down | Fore-and-aft: 3.51 m (134 in.)Underframe clearance | Underframe clearance: 60.9 cm (24.1 in.) | Between ranks range: 73.7 to 104 cm (29 to 41-in.) | shanks type: 19 x 44 x 610 mm (3/4 x 1-3/4 x 24-in.) / spacing: 22.8 cm (9 in.) | Trip clearance: 25.4 cm (10 in.) | Arc: 47 degree | Transport clearance: With sweep extenders: 413 mm (16.26-in.) / Without sweep extenders: 438 mm (17.26-in)
  • Seeding tool depth control - Range: 1/4 inch increments
  • 8.53 m (28 ft)
  • Mainframe - Centerframe: 3.56 m (11-ft. 8-in.) | 4.97 m (16-ft. 3.6-in)
  • Maximum: 3.90 m (12-ft. 9.3-in) | Minimum: 3.46 m (11-ft. 4.3-in)
  • Number of ranks: 4 ranks of c-shanks,1 rank seed openers | Number of sections: 3 | Harrow - Type: Tine tooth | Harrow - Attachment: Rolling Basket with 1-bar harrow | Penetration force: Patented Active Hydraulic | Opener quantiy: 46 on 7.5-in. spacing / 56 on 6-in. spacing | Folding: over-center | Shanks type: Tru-Position / quantity: 37
  • Double disk
  • Boot: aluminum